HVAC ELECTRONICS & CONTROLS

BDQ72 Series

Single-phase inverter drive with multiple thermal configurations

The SAMYOU BDQ72 Series is a single-phase inverter drive platform for compatible DC inverter compressors requiring up to 15 A output current. Sensorless FOC, SVPWM, MTPA, and field weakening support controlled compressor operation. Standard, extended heat sink, STO-equipped, and expanded input-voltage variants provide flexibility for OEM thermal and electrical integration.

Up to 3.95 kW Maximum Input Power (variant-dependent)
Up to 15 A Maximum Compressor Output Current (variant-dependent)
Single-phase AC Input Supply
RS-485 Modbus RTU

Key Features

  • Sensorless compressor control

    Field-oriented control (FOC) with space-vector pulse-width modulation (SVPWM).

  • Dual closed-loop regulation

    Separate speed and current loops regulate compressor operation.

  • Torque control

    Maximum torque per ampere (MTPA) control uses the compressor motor's reluctance torque characteristics.

  • Extended operating range

    Field weakening supports operation within the matched compressor's permitted speed range.

  • Controlled starting

    Closed-loop starting adjusts starting torque to the load. Compressor matching is required.

  • Host-controller integration

    Asynchronous half-duplex RS-485 communication using Modbus RTU.

Technical Specifications

Electrical
Input supply 220 VAC ±20%; 208-277 VAC ±10% on BDQ72A1F5
Supply phase Single-phase
Input frequency 50 / 60 Hz
Maximum input current Up to 18 A at 220 VAC; variant-dependent
Maximum input power Up to 3.95 kW; variant-dependent
Maximum compressor output current Up to 15 A; variant-dependent
Output frequency 10-120 Hz; subject to compressor specification
Carrier frequency 5 kHz default
Full-load drive efficiency ≥97%
Control & Communication
Motor control Sensorless FOC with SVPWM; dual speed and current loops
Torque strategy Maximum torque per ampere (MTPA)
Field weakening Supported; compressor-dependent
Communication Isolated RS-485, asynchronous half-duplex; Modbus RTU
Mechanical & Environmental
Cooling Air cooling
Mechanical dimensions See model-specific drawings
Operating temperature -30 to +60 °C
Storage temperature -40 to +85 °C
Operating humidity 10-95% RH; no frost or condensation
Altitude No derating below 1,000 m; derate by 1% per 100 m above 1,000 m; maximum 4,000 m

Available Models

Compare configurations for your application requirements.

ModelConfigurationInput VoltageKey FeatureDimensions
BDQ72A1F2 Air-cooled 220 VAC ±20% Input: 17 A; input power: 3.7 kW; output: 15 A; Without STO See model-specific drawing
BDQ72A3 Air-cooled; extended heat sink 220 VAC ±20% Input: 18 A; input power: 3.95 kW; output: 15 A; Without STO See model-specific drawing
BDQ72A4F2 Air-cooled; extended heat sink 220 VAC ±20% Input: 18 A; input power: 3.95 kW; output: 15 A; STO-equipped See model-specific drawing
BDQ72A1F5 Air-cooled; expanded voltage 208-277 VAC ±10% Input: 17 A; input power: Contact SAMYOU; output: 15 A; Without STO See model-specific drawing

Engineering Resources

View Technical Datasheet

BDQ72
Mechanical Drawing
BDQ72 connection
Connection Diagram

OEM ENGINEERING SUPPORT

Need Help With Your Application?

Share your system requirements, integration needs, or product evaluation plans with SAMYOU. Our team can discuss suitable solutions for your project.