HVAC ELECTRONICS & CONTROLS
BSQ180 Series
Three-phase compressor control with air- and liquid-cooled variants
The SAMYOU BSQ180 Series provides three-phase inverter control for compatible DC inverter compressors in heat pump and air-conditioning systems. Air-cooled and liquid-cooled variants cover maximum input power from 9 to 11.5 kW and compressor output current from 20 to 24 A. Sensorless FOC, SVPWM, MTPA, and field weakening are combined with RS-485 Modbus RTU communication. An STO-equipped configuration is available as BSQ180D2.
Key Features
Sensorless compressor control
Field-oriented control (FOC) with space-vector pulse-width modulation (SVPWM).
Dual closed-loop regulation
Separate speed and current loops regulate compressor operation.
Torque control
Maximum torque per ampere (MTPA) control uses the compressor motor's reluctance torque characteristics.
Extended operating range
Field weakening supports operation within the matched compressor's permitted speed range.
Controlled starting
Closed-loop starting adjusts starting torque to the load. Compressor matching is required.
Host-controller integration
Asynchronous half-duplex RS-485 communication using Modbus RTU.
Technical Specifications
| Electrical | |
|---|---|
| Input supply | 380 VAC line-to-line, +20% / -15% |
| Supply phase | Three-phase |
| Input frequency | 50 / 60 Hz |
| Maximum input current | Up to 20 A at 380 VAC; variant-dependent |
| Maximum input power | Up to 11.5 kW; variant-dependent |
| Maximum compressor output current | Up to 24 A; variant-dependent |
| Compressor speed range | 10-160 rps; compressor-dependent |
| Carrier frequency | 5 kHz |
| Full-load drive efficiency | ≥97% |
| Control & Communication | |
| Motor control | Sensorless FOC with SVPWM; dual speed and current loops |
| Torque strategy | Maximum torque per ampere (MTPA) |
| Field weakening | Supported; compressor-dependent |
| Communication | Isolated RS-485, asynchronous half-duplex; Modbus RTU |
| Mechanical & Environmental | |
| Cooling | Air or liquid cooling; variant-dependent |
| Mechanical dimensions | See model-specific drawings |
| Operating temperature | -35 to +60 °C |
| Storage temperature | -40 to +85 °C |
| Operating humidity | 10-95% RH; no frost or condensation |
| Altitude | No derating below 1,000 m; derate by 1% per 100 m above 1,000 m; maximum 4,000 m |
Available Models
Compare configurations for your application requirements.
| Model | Configuration | Input Voltage | Key Feature | Dimensions |
|---|---|---|---|---|
| BSQ180D2 | Air-cooled | 380 VAC +20% / -15% | Input: 15 A; input power: 9 kW; output: 20 A; STO-equipped | See model-specific drawing |
| BSQ180B2F2 | Air-cooled | 380 VAC +20% / -15% | Input: 15 A; input power: 9 kW; output: 20 A; Without STO | See model-specific drawing |
| BSQ180B2 | Air-cooled | 380 VAC +20% / -15% | Input: 17 A; input power: 10 kW; output: 22 A; Without STO | See model-specific drawing |
| BSQ180B2Y1 | Liquid-cooled | 380 VAC +20% / -15% | Input: 20 A; input power: 11.5 kW; output: 24 A; Without STO | See model-specific drawing |
Engineering Resources


OEM ENGINEERING SUPPORT
Need Help With Your Application?
Share your system requirements, integration needs, or product evaluation plans with SAMYOU. Our team can discuss suitable solutions for your project.